TTY(4) MachTen Programmer’s Manual TTY(4)

NAME
tty - general terminal interface

SYNOPSIS
#include <sys/ioctl.h>

DESCRIPTION
This section describes the interface to the terminal drivers in the sys-
tem.

Terminal Special Files
Each hardware terminal port on the system usually has a terminal special
device file associated with it in the directory ‘‘/dev/’’ (for example,
‘‘/dev/tty03’’). When a user logs into the system on one of these hard-
ware terminal ports, the system has already opened the associated device
and prepared the line for normal interactive use (see getty(8).) There
is also a special case of a terminal file that connects not to a hardware
terminal port, but to another program on the other side. These special
terminal devices are called ptys and provide the mechanism necessary to
give users the same interface to the system when logging in over a net-
work (using rlogin(1), or telnet(1) for example.) Even in these cases
the details of how the terminal file was opened and set up is already
handled by special software in the system. Thus, users do not normally
need to worry about the details of how these lines are opened or used.
Also, these lines are often used for dialing out of a system (through an
out-calling modem), but again the system provides programs that hide the
details of accessing these terminal special files (see tip(2).)

When an interactive user logs in, the system prepares the line to behave
in a certain way (called a line discipline), the particular details of
which is described in stty(1) at the command level, and in termios(4) at
the programming level. A user may be concerned with changing settings
associated with his particular login terminal and should refer to the
preceding man pages for the common cases. The remainder of this man page
is concerned with describing details of using and controlling terminal
devices at a low level, such as that possibly required by a program wish-
ing to provide features similar to those provided by the system.

Line disciplines
A terminal file is used like any other file in the system in that it can
be opened, read, and written to using standard system calls. For each
existing terminal file, there is a software processing module called a
line discipline is associated with it. The line discipline essentially
glues the low level device driver code with the high level generic inter-
face routines (such as read(2) and write(2)), and is responsible for im-
plementing the semantics associated with the device. When a terminal
file is first opened by a program, the default line discipline called the
termios line discipline is associated with the file. This is the primary
line discipline that is used in most cases and provides the semantics
that users normally associate with a terminal. When the termios line
discipline is in effect, the terminal file behaves and is operated ac-
cording to the rules described in termios(4). Please refer to that man
page for a full description of the terminal semantics. The operations
described here generally represent features common across all line
disciplines, however some of these calls may not make sense in conjunc-
tion with a line discipline other than termios, and some may not be sup-
ported by the underlying hardware (or lack thereof, as in the case of
ptys).

Terminal File Operations
All of the following operations are invoked using the ioctl(2) system
call. Refer to that man page for a description of the request and argp
parameters. In addition to the ioctl requests defined here, the specific
line discipline in effect will define other requests specific to it (ac-
tually termios(4) defines them as function calls, not ioctl requests.)
The following section lists the available ioctl requests. The name of
the request, a description of its purpose, and the typed argp parameter
(if any) are listed. For example, the first entry says

TIOCSETD int *ldisc

and would be called on the terminal associated with file descriptor zero
by the following code fragment:

int ldisc;

ldisc = TTYDISC;
ioctl(0, TIOCSETD, &ldisc);

Terminal File Request Descriptions

TIOCSETD int *ldisc
Change to the new line discipline pointed to by ldisc. The
available line disciplines are listed in <sys/termios.h> and
currently are:

TTYDISC Termios interactive line discipline.
TABLDISC Tablet line discipline.
SLIPDISC Serial IP line discipline.

TIOCGETD int *ldisc
Return the current line discipline in the integer pointed to
by ldisc.

TIOCSBRK void
Set the terminal hardware into BREAK condition.

TIOCCBRK void
Clear the terminal hardware BREAK condition.

TIOCSDTR void
Assert data terminal ready (DTR).

TIOCCDTR void
Clear data terminal ready (DTR).

TIOCGPGRP int *tpgrp
Return the current process group the terminal is associated
with in the integer pointed to by tpgrp. This is the underly-
ing call that implements the termios(4) tcgetattr() call.

TIOCSPGRP int *tpgrp
Associate the terminal with the process group (as an integer)
pointed to by tpgrp. This is the underlying call that imple-
ments the termios(4) tcsetattr() call.

TIOCGETA struct termios *term
Place the current value of the termios state associated with
the device in the termios structure pointed to by term. This
is the underlying call that implements the termios(4)
tcgetattr() call.

TIOCSETA struct termios *term
Set the termios state associated with the device immediately.
This is the underlying call that implements the termios(4)
tcsetattr() call with the TCSANOW option.

TIOCSETAW struct termios *term
First wait for any output to complete, then set the termios
state associated with the device. This is the underlying
call that implements the termios(4) tcsetattr() call with the
TCSADRAIN option.

TIOCSETAF struct termios *term
First wait for any output to complete, clear any pending in-
put, then set the termios state associated with the device.
This is the underlying call that implements the termios(4)
tcsetattr() call with the TCSAFLUSH option.

TIOCOUTQ int *num
Place the current number of characters in the output queue in
the integer pointed to by num.

TIOCSTI char *cp
Simulate typed input. Pretend as if the terminal received
the character pointed to by cp.

TIOCNOTTY void
This call is obsolete but left for compatibility. In the
past, when a process that didn’t have a controlling terminal
(see The Controlling Terminal in termios(4)) first opened a
terminal device, it acquired that terminal as its controlling
terminal. For some programs this was a hazard as they didn’t
want a controlling terminal in the first place, and this pro-
vided a mechanism to disassociate the controlling terminal
from the calling process. It must be called by opening the
file /dev/tty and calling TIOCNOTTY on that file descriptor.

The current system does not allocate a controlling terminal
to a process on an open() call: there is a specific ioctl
called TIOSCTTY to make a terminal the controlling terminal.
In addition, a program can fork() and call the setsid() sys-
tem call which will place the process into its own session -
which has the effect of disassociating it from the control-
ling terminal. This is the new and preferred method for pro-
grams to lose their controlling terminal.

TIOCSTOP void
Stop output on the terminal (like typing ^S at the keyboard).

TIOCSTART void
Start output on the terminal (like typing ^Q at the key-
board).

TIOCSCTTY void
Make the terminal the controlling terminal for the process
(the process must not currently have a controlling terminal).

TIOCDRAIN void
Wait until all output is drained.

TIOCEXCL void
Set exclusive use on the terminal. No further opens are per-
mitted except by root. Of course, this means that programs
that are run by root (or setuid) will not obey the exclusive
setting - which limits the usefulness of this feature.

TIOCNXCL void
Clear exclusive use of the terminal. Further opens are per-
mitted.

TIOCFLUSH int *what
If the value of the int pointed to by what contains the FREAD
bit as defined in <sys/file.h>, then all characters in the
input queue are cleared. If it contains the FWRITE bit, then
all characters in the output queue are cleared. If the value
of the integer is zero, then it behaves as if both the FREAD
and FWRITE bits were set (i.e. clears both queues).

TIOCGWINSZ struct winsize *ws
Put the window size information associated with the terminal
in the winsize structure pointed to by ws. The window size
structure contains the number of rows and columns (and pixels
if appropriate) of the devices attached to the terminal. It
is set by user software and is the means by which most full-
screen oriented programs determine the screen size. The
winsize structure is defined in <sys/ioctl.h>.

TIOCSWINSZ struct winsize *ws
Set the window size associated with the terminal to be the
value in the winsize structure pointed to by ws (see above).

TIOCCONS int *on
If on points to a non-zero integer, redirect kernel console
output (kernel printf’s) to this terminal. If on points to a
zero integer, redirect kernel console output back to the nor-
mal console. This is usually used on workstations to redi-
rect kernel messages to a particular window.

TIOCMSET int *state
The integer pointed to by state contains bits that correspond
to modem state. Following is a list of defined variables and
the modem state they represent:

TIOCM_LE Line Enable.
TIOCM_DTR Data Terminal Ready.
TIOCM_RTS Request To Send.
TIOCM_ST Secondary Transmit.
TIOCM_SR Secondary Receive.
TIOCM_CTS Clear To Send.
TIOCM_CAR Carrier Detect.
TIOCM_CD Carier Detect (synonym).
TIOCM_RNG Ring Indication.
TIOCM_RI Ring Indication (synonym).
TIOCM_DSR Data Set Ready.

This call sets the terminal modem state to that represented
by state. Not all terminals may support this.

TIOCMGET int *state
Return the current state of the terminal modem lines as rep-
resented above in the integer pointed to by state.

TIOCMBIS int *state
The bits in the integer pointed to by state represent modem
state as described above, however the state is OR-ed in with
the current state.

TIOCMBIC int *state
The bits in the integer pointed to by state represent modem
state as described above, however each bit which is on in
state is cleared in the terminal.

SEE ALSO
getty(8), ioctl(2), pty(4), stty(1), termios(4)

4th Berkeley Distribution August 14, 1992 4