perlfaq7 - Perl Language Issues ($Revision: 1.21 $, $Date: 1998/06/22 15:20:07 $)
This section deals with general Perl language issues that don’t clearly fit into any of the other sections.
Can I get a BNF/ yacc/ RE for the Perl language?
There is no BNF , but you can paw your way through the yacc grammar in perly.y in the source distribution if you’re particularly brave. The grammar relies on very smart tokenizing code, so be prepared to venture into toke.c as well.
In the words of Chaim Frenkel: "Perl’s grammar can not be reduced to BNF . The work of parsing perl is distributed between yacc, the lexer, smoke and mirrors."
What are all these $@%* punctuation signs, and how do I know when to use them?
They are type specifiers, as detailed in the perldata manpage:
$ for scalar
values (number, string or reference)
@ for arrays
% for hashes (associative arrays)
* for all types of that symbol name. In version 4 you used
them like
pointers, but in modern perls you can just use
references.
While there are a few places where you don’t actually need these type specifiers, you should always use them.
A couple of others that you’re likely to encounter that aren’t really type specifiers are:
<> are
used for inputting a record from a filehandle.
\ takes a reference to something.
Note that < FILE > is neither the type specifier for files nor the name of the handle. It is the <> operator applied to the handle FILE . It reads one line (well, record - see the section on $/ in the perlvar manpage) from the handle FILE in scalar context, or all lines in list context. When performing open, close, or any other operation besides <> on files, or even talking about the handle, do not use the brackets. These are correct: eof(FH), seek(FH, 0, 2) and "copying from STDIN to FILE ".
Do I always/never have to quote my strings or use semicolons and commas?
Normally, a bareword doesn’t need to be quoted, but in most cases probably should be (and must be under use strict). But a hash key consisting of a simple word (that isn’t the name of a defined subroutine) and the left-hand operand to the => operator both count as though they were quoted:
This is like
this
------------ ---------------
$foo{line} $foo{"line"}
bar => stuff "bar" => stuff
The final semicolon in a block is optional, as is the final comma in a list. Good style (see the perlstyle manpage) says to put them in except for one-liners:
if ($whoops) {
exit 1 }
@nums = (1, 2, 3);
if ($whoops) {
exit 1;
}
@lines = (
"There Beren came from mountains cold",
"And lost he wandered under leaves",
);
How do I skip some return values?
One way is to treat the return values as a list and index into it:
$dir = (getpwnam($user))[7];
Another way is to use undef as an element on the left-hand-side:
($dev, $ino, undef, undef, $uid, $gid) = stat($file);
How do I temporarily block warnings?
The $^W variable (documented in the perlvar manpage) controls runtime warnings for a block:
{
local $^W = 0; # temporarily turn off warnings
$a = $b + $c; # I know these might be undef
}
Note that like all the punctuation variables, you cannot currently use my() on $^W, only local().
A new use warnings pragma is in the works to provide finer control over all this. The curious should check the perl5-porters mailing list archives for details.
What’s an extension?
A way of calling compiled C code from Perl. Reading the perlxstut manpage is a good place to learn more about extensions.
Why do Perl operators have different precedence than C operators?
Actually, they don’t. All C operators that Perl copies have the same precedence in Perl as they do in C. The problem is with operators that C doesn’t have, especially functions that give a list context to everything on their right, eg print, chmod, exec, and so on. Such functions are called "list operators" and appear as such in the precedence table in the perlop manpage.
A common mistake is to write:
unlink $file ⎪⎪ die "snafu";
This gets interpreted as:
unlink ($file ⎪⎪ die "snafu");
To avoid this problem, either put in extra parentheses or use the super low precedence or operator:
(unlink $file)
⎪⎪ die "snafu";
unlink $file or die "snafu";
The "English" operators (and, or, xor, and not) deliberately have precedence lower than that of list operators for just such situations as the one above.
Another operator with surprising precedence is exponentiation. It binds more tightly even than unary minus, making -2**2 product a negative not a positive four. It is also right-associating, meaning that 2**3**2 is two raised to the ninth power, not eight squared.
Although it has the same precedence as in C, Perl’s ?: operator produces an lvalue. This assigns $x to either $a or $b, depending on the trueness of $maybe:
($maybe ? $a : $b) = $x;
How do I declare/create a structure?
In general, you don’t "declare" a structure. Just use a (probably anonymous) hash reference. See the perlref manpage and the perldsc manpage for details. Here’s an example:
$person = {}; #
new anonymous hash
$person->{AGE} = 24; # set field AGE to 24
$person->{NAME} = "Nat"; # set field NAME to
"Nat"
If you’re looking for something a bit more rigorous, try the perltoot manpage.
How do I create a module?
A module is a package that lives in a file of the same name. For example, the Hello::There module would live in Hello/There.pm. For details, read the perlmod manpage. You’ll also find the Exporter manpage helpful. If you’re writing a C or mixed-language module with both C and Perl, then you should study the perlxstut manpage.
Here’s a convenient template you might wish you use when starting your own module. Make sure to change the names appropriately.
package Some::Module; # assumes Some/Module.pm
use strict;
BEGIN {
use Exporter ();
use vars qw($VERSION @ISA @EXPORT @EXPORT_OK
%EXPORT_TAGS);
## set the
version for version checking; uncomment to use
## $VERSION = 1.00;
# if using
RCS/CVS, this next line may be preferred,
# but beware two-digit versions.
$VERSION = do{my@r=q$Revision: 1.21 $=~/\d+/g;sprintf
’%d.’.’%02d’x$#r,@r};
@ISA =
qw(Exporter);
@EXPORT = qw(&func1 &func2 &func3);
%EXPORT_TAGS = ( ); # eg: TAG => [ qw!name1 name2! ],
# your exported
package globals go here,
# as well as any optionally exported functions
@EXPORT_OK = qw($Var1 %Hashit);
}
use vars @EXPORT_OK;
# non-exported
package globals go here
use vars qw( @more $stuff );
# initialize
package globals, first exported ones
$Var1 = ’’;
%Hashit = ();
# then the
others (which are still accessible as $Some::Module::stuff)
$stuff = ’’;
@more = ();
# all
file-scoped lexicals must be created before
# the functions below that use them.
# file-private
lexicals go here
my $priv_var = ’’;
my %secret_hash = ();
# here’s
a file-private function as a closure,
# callable as &$priv_func; it cannot be prototyped.
my $priv_func = sub {
# stuff goes here.
};
# make all your
functions, whether exported or not;
# remember to put something interesting in the {} stubs
sub func1 {} # no prototype
sub func2() {} # proto’d void
sub func3($$) {} # proto’d to 2 scalars
# this one
isn’t exported, but could be called!
sub func4(\%) {} # proto’d to 1 hash ref
END { } # module clean-up code here (global destructor)
1; # modules must return true
How do I create a class?
See the perltoot manpage for an introduction to classes and objects, as well as the perlobj manpage and the perlbot manpage.
How can I tell if a variable is tainted?
See the section on Laundering and Detecting Tainted Data in the perlsec manpage. Here’s an example (which doesn’t use any system calls, because the kill() is given no processes to signal):
sub is_tainted
{
return ! eval { join(’’,@_), kill 0; 1; };
}
This is not -w clean, however. There is no -w clean way to detect taintedness - take this as a hint that you should untaint all possibly-tainted data.
What’s a closure?
Closures are documented in the perlref manpage.
Closure is a computer science term with a precise but hard-to-explain meaning. Closures are implemented in Perl as anonymous subroutines with lasting references to lexical variables outside their own scopes. These lexicals magically refer to the variables that were around when the subroutine was defined (deep binding).
Closures make sense in any programming language where you can have the return value of a function be itself a function, as you can in Perl. Note that some languages provide anonymous functions but are not capable of providing proper closures; the Python language, for example. For more information on closures, check out any textbook on functional programming. Scheme is a language that not only supports but encourages closures.
Here’s a classic function-generating function:
sub
add_function_generator {
return sub { shift + shift };
}
$add_sub =
add_function_generator();
$sum = $add_sub->(4,5); # $sum is 9 now.
The closure works as a function template with some customization slots left out to be filled later. The anonymous subroutine returned by add_function_generator() isn’t technically a closure because it refers to no lexicals outside its own scope.
Contrast this with the following make_adder() function, in which the returned anonymous function contains a reference to a lexical variable outside the scope of that function itself. Such a reference requires that Perl return a proper closure, thus locking in for all time the value that the lexical had when the function was created.
sub make_adder
{
my $addpiece = shift;
return sub { shift + $addpiece };
}
$f1 =
make_adder(20);
$f2 = make_adder(555);
Now &$f1($n) is always 20 plus whatever $n you pass in, whereas &$f2($n) is always 555 plus whatever $n you pass in. The $addpiece in the closure sticks around.
Closures are often used for less esoteric purposes. For example, when you want to pass in a bit of code into a function:
my $line;
timeout( 30, sub { $line = <STDIN> } );
If the code to execute had been passed in as a string, ’$line = <STDIN>’, there would have been no way for the hypothetical timeout() function to access the lexical variable $line back in its caller’s scope.
What is variable suicide and how can I prevent it?
Variable suicide is when you (temporarily or permanently) lose the value of a variable. It is caused by scoping through my() and local() interacting with either closures or aliased foreach() interator variables and subroutine arguments. It used to be easy to inadvertently lose a variable’s value this way, but now it’s much harder. Take this code:
my $f =
"foo";
sub T {
while ($i++ < 3) { my $f = $f; $f .= "bar";
print $f, "\n" }
}
T;
print "Finally $f\n";
The $f that has "bar" added to it three times should be a new $f (my $f should create a new local variable each time through the loop). It isn’t, however. This is a bug, and will be fixed.
How can I pass/return a {Function, FileHandle, Array, Hash, Method, Regexp}?
With the
exception of regexps, you need to pass references to these
objects. See the section on Pass by Reference in the
perlsub manpage for this particular question, and the
perlref manpage for information on references.
Passing Variables and Functions
Regular variables and functions are quite easy: just pass in a reference to an existing or anonymous variable or function:
func( \$some_scalar );
func(
\$some_array );
func( [ 1 .. 10 ] );
func(
\%some_hash );
func( { this => 10, that => 20 } );
func(
\&some_func );
func( sub { $_[0] ** $_[1] } );
Passing Filehandles
To pass filehandles to subroutines, use the *FH or \*FH notations. These are "typeglobs" - see the section on Typeglobs and Filehandles in the perldata manpage and especially the section on Pass by Reference in the perlsub manpage for more information.
Here’s an excerpt:
If you’re passing around filehandles, you could usually just use the bare typeglob, like * STDOUT , but typeglobs references would be better because they’ll still work properly under use strict ’refs’. For example:
splutter(\*STDOUT);
sub splutter {
my $fh = shift;
print $fh "her um well a hmmm\n";
}
$rec =
get_rec(\*STDIN);
sub get_rec {
my $fh = shift;
return scalar <$fh>;
}
If you’re planning on generating new filehandles, you could do this:
sub openit {
my $name = shift;
local *FH;
return open (FH, $path) ? *FH : undef;
}
$fh = openit(’< /etc/motd’);
print <$fh>;
Passing Regexps
To pass regexps around, you’ll need to either use one of the highly experimental regular expression modules from CPAN (Nick Ing-Simmons’s Regexp or Ilya Zakharevich’s Devel::Regexp), pass around strings and use an exception-trapping eval, or else be be very, very clever. Here’s an example of how to pass in a string to be regexp compared:
sub compare($$)
{
my ($val1, $regexp) = @_;
my $retval = eval { $val =~ /$regexp/ };
die if $@;
return $retval;
}
$match = compare("old McDonald", q/d.*D/);
Make sure you never say something like this:
return eval "\$val =~ /$regexp/"; # WRONG
or someone can sneak shell escapes into the regexp due to the double interpolation of the eval and the double-quoted string. For example:
$pattern_of_evil = ’danger ${ system("rm -rf * &") } danger’;
eval "\$string =~ /$pattern_of_evil/";
Those preferring to be very, very clever might see the O’Reilly book, Mastering Regular Expressions, by Jeffrey Friedl. Page 273’s Build_MatchMany_Function() is particularly interesting. A complete citation of this book is given in the perlfaq2 manpage.
Passing Methods
To pass an object method into a subroutine, you can do this:
call_a_lot(10,
$some_obj, "methname")
sub call_a_lot {
my ($count, $widget, $trick) = @_;
for (my $i = 0; $i < $count; $i++) {
$widget->$trick();
}
}
Or you can use a closure to bundle up the object and its method call and arguments:
my $whatnot =
sub { $some_obj->obfuscate(@args) };
func($whatnot);
sub func {
my $code = shift;
&$code();
}
You could also investigate the can() method in the UNIVERSAL class (part of the standard perl distribution).
How do I create a static variable?
As with most things in Perl, TMTOWTDI . What is a "static variable" in other languages could be either a function-private variable (visible only within a single function, retaining its value between calls to that function), or a file-private variable (visible only to functions within the file it was declared in) in Perl.
Here’s code to implement a function-private variable:
BEGIN {
my $counter = 42;
sub prev_counter { return --$counter }
sub next_counter { return $counter++ }
}
Now prev_counter() and next_counter() share a private variable $counter that was initialized at compile time.
To declare a file-private variable, you’ll still use a my(), putting it at the outer scope level at the top of the file. Assume this is in file Pax.pm:
package Pax;
my $started = scalar(localtime(time()));
sub begun { return $started }
When use Pax or require Pax loads this module, the variable will be initialized. It won’t get garbage-collected the way most variables going out of scope do, because the begun() function cares about it, but no one else can get it. It is not called $Pax::started because its scope is unrelated to the package. It’s scoped to the file. You could conceivably have several packages in that same file all accessing the same private variable, but another file with the same package couldn’t get to it.
See the section on Peristent Private Variables in the perlsub manpage for details.
What’s the difference between dynamic and lexical (static) scoping? Between local() and my()?
local($x) saves away the old value of the global variable $x, and assigns a new value for the duration of the subroutine, which is visible in other functions called from that subroutine. This is done at run-time, so is called dynamic scoping. local() always affects global variables, also called package variables or dynamic variables.
my($x) creates a new variable that is only visible in the current subroutine. This is done at compile-time, so is called lexical or static scoping. my() always affects private variables, also called lexical variables or (improperly) static(ly scoped) variables.
For instance:
sub visible {
print "var has value $var\n";
}
sub dynamic {
local $var = ’local’; # new temporary value for
the still-global
visible(); # variable called $var
}
sub lexical {
my $var = ’private’; # new private variable,
$var
visible(); # (invisible outside of sub scope)
}
$var = ’global’;
visible(); #
prints global
dynamic(); # prints local
lexical(); # prints global
Notice how at no point does the value "private" get printed. That’s because $var only has that value within the block of the lexical() function, and it is hidden from called subroutine.
In summary, local() doesn’t make what you think of as private, local variables. It gives a global variable a temporary value. my() is what you’re looking for if you want private variables.
See the section on Private Variables via my() in the perlsub manpage and the section on Temporary Values via local() in the perlsub manpage for excruciating details.
How can I access a dynamic variable while a similarly named lexical is in scope?
You can do this via symbolic references, provided you haven’t set use strict "refs". So instead of $var, use ${’var’}.
local $var =
"global";
my $var = "lexical";
print "lexical is $var\n";
no strict
’refs’;
print "global is ${’var’}\n";
If you know your package, you can just mention it explicitly, as in $Some_Pack::var. Note that the notation $::var is not the dynamic $var in the current package, but rather the one in the main package, as though you had written $main::var. Specifying the package directly makes you hard-code its name, but it executes faster and avoids running afoul of use strict "refs".
What’s the difference between deep and shallow binding?
In deep binding, lexical variables mentioned in anonymous subroutines are the same ones that were in scope when the subroutine was created. In shallow binding, they are whichever variables with the same names happen to be in scope when the subroutine is called. Perl always uses deep binding of lexical variables (i.e., those created with my()). However, dynamic variables (aka global, local, or package variables) are effectively shallowly bound. Consider this just one more reason not to use them. See the answer to the section on What’s a closure?.
Why doesn’t ""my($foo) = < FILE >;"" work right?
my() and local() give list context to the right hand side of =. The < FH > read operation, like so many of Perl’s functions and operators, can tell which context it was called in and behaves appropriately. In general, the scalar() function can help. This function does nothing to the data itself (contrary to popular myth) but rather tells its argument to behave in whatever its scalar fashion is. If that function doesn’t have a defined scalar behavior, this of course doesn’t help you (such as with sort()).
To enforce scalar context in this particular case, however, you need merely omit the parentheses:
local($foo) =
<FILE>; # WRONG
local($foo) = scalar(<FILE>); # ok
local $foo = <FILE>; # right
You should probably be using lexical variables anyway, although the issue is the same here:
my($foo) =
<FILE>; # WRONG
my $foo = <FILE>; # right
How do I redefine a builtin function, operator, or method?
Why do you want to do that? :-)
If you want to override a predefined function, such as open(), then you’ll have to import the new definition from a different module. See the section on Overriding Builtin Functions in the perlsub manpage. There’s also an example in the section on Class::Template in the perltoot manpage.
If you want to overload a Perl operator, such as + or **, then you’ll want to use the use overload pragma, documented in the overload manpage.
If you’re talking about obscuring method calls in parent classes, see the section on Overridden Methods in the perltoot manpage.
What’s the difference between calling a function as &foo and foo()?
When you call a function as &foo, you allow that function access to your current @_ values, and you by-pass prototypes. That means that the function doesn’t get an empty @_, it gets yours! While not strictly speaking a bug (it’s documented that way in the perlsub manpage), it would be hard to consider this a feature in most cases.
When you call your function as &foo(), then you do get a new @_, but prototyping is still circumvented.
Normally, you want to call a function using foo(). You may only omit the parentheses if the function is already known to the compiler because it already saw the definition (use but not require), or via a forward reference or use subs declaration. Even in this case, you get a clean @_ without any of the old values leaking through where they don’t belong.
How do I create a switch or case statement?
This is explained in more depth in the the perlsyn manpage. Briefly, there’s no official case statement, because of the variety of tests possible in Perl (numeric comparison, string comparison, glob comparison, regexp matching, overloaded comparisons, ...). Larry couldn’t decide how best to do this, so he left it out, even though it’s been on the wish list since perl1.
The general answer is to write a construct like this:
for
($variable_to_test) {
if (/pat1/) { } # do something
elsif (/pat2/) { } # do something else
elsif (/pat3/) { } # do something else
else { } # default
}
Here’s a simple example of a switch based on pattern matching, this time lined up in a way to make it look more like a switch statement. We’ll do a multi-way conditional based on the type of reference stored in $whatchamacallit:
SWITCH: for (ref $whatchamacallit) {
/^$/ && die "not a reference";
/SCALAR/
&& do {
print_scalar($$ref);
last SWITCH;
};
/ARRAY/
&& do {
print_array(@$ref);
last SWITCH;
};
/HASH/
&& do {
print_hash(%$ref);
last SWITCH;
};
/CODE/
&& do {
warn "can’t print function ref";
last SWITCH;
};
# DEFAULT
warn "User defined type skipped";
}
See perlsyn/"Basic BLOCKs and Switch Statements" for many other examples in this style.
Sometimes you should change the positions of the constant and the variable. For example, let’s say you wanted to test which of many answers you were given, but in a case-insensitive way that also allows abbreviations. You can use the following technique if the strings all start with different characters, or if you want to arrange the matches so that one takes precedence over another, as "SEND" has precedence over "STOP" here:
chomp($answer =
<>);
if ("SEND" =~ /^\Q$answer/i) { print "Action
is send\n" }
elsif ("STOP" =~ /^\Q$answer/i) { print
"Action is stop\n" }
elsif ("ABORT" =~ /^\Q$answer/i) { print
"Action is abort\n" }
elsif ("LIST" =~ /^\Q$answer/i) { print
"Action is list\n" }
elsif ("EDIT" =~ /^\Q$answer/i) { print
"Action is edit\n" }
A totally different approach is to create a hash of function references.
my %commands =
(
"happy" => \&joy,
"sad", => \&sullen,
"done" => sub { die "See ya!" },
"mad" => \&angry,
);
print "How
are you? ";
chomp($string = <STDIN>);
if ($commands{$string}) {
$commands{$string}->();
} else {
print "No such command: $string\n";
}
How can I catch accesses to undefined variables/functions/methods?
The AUTOLOAD method, discussed in the section on Autoloading in the perlsub manpage and the section on AUTOLOAD : Proxy Methods in the perltoot manpage, lets you capture calls to undefined functions and methods.
When it comes to undefined variables that would trigger a warning under -w, you can use a handler to trap the pseudo-signal __WARN__ like this:
$SIG{__WARN__} = sub {
for ( $_[0] ) { # voici un switch statement
/Use of
uninitialized value/ && do {
# promote warning to a fatal
die $_;
};
# other warning cases to catch could go here;
warn $_;
}
};
Why can’t a method included in this same file be found?
Some possible reasons: your inheritance is getting confused, you’ve misspelled the method name, or the object is of the wrong type. Check out the perltoot manpage for details on these. You may also use print ref($object) to find out the class $object was blessed into.
Another possible reason for problems is because you’ve used the indirect object syntax (eg, find Guru "Samy") on a class name before Perl has seen that such a package exists. It’s wisest to make sure your packages are all defined before you start using them, which will be taken care of if you use the use statement instead of require. If not, make sure to use arrow notation (eg, Guru->find("Samy")) instead. Object notation is explained in the perlobj manpage.
Make sure to read about creating modules in the perlmod manpage and the perils of indirect objects in the section on WARNING in the perlobj manpage.
How can I find out my current package?
If you’re just a random program, you can do this to find out what the currently compiled package is:
my $packname = __PACKAGE__;
But if you’re a method and you want to print an error message that includes the kind of object you were called on (which is not necessarily the same as the one in which you were compiled):
sub amethod {
my $self = shift;
my $class = ref($self) ⎪⎪ $self;
warn "called me from a $class object";
}
How can I comment out a large block of perl code?
Use embedded POD to discard it:
# program is here
=for nobody
This paragraph is commented out
# program continues
=begin comment text
all of this stuff
here will be
ignored
by everyone
=end comment text
=cut
This can’t go just anywhere. You have to put a pod directive where the parser is expecting a new statement, not just in the middle of an expression or some other arbitrary yacc grammar production.
Copyright (c) 1997, 1998 Tom Christiansen and Nathan Torkington. All rights reserved.
When included as part of the Standard Version of Perl, or as part of its complete documentation whether printed or otherwise, this work may be distributed only under the terms of Perl’s Artistic License. Any distribution of this file or derivatives thereof outside of that package require that special arrangements be made with copyright holder.
Irrespective of its distribution, all code examples in this file are hereby placed into the public domain. You are permitted and encouraged to use this code in your own programs for fun or for profit as you see fit. A simple comment in the code giving credit would be courteous but is not required.