NAME
syslogd - log systems messages

SYNOPSIS
/usr/etc/syslogd [ -fconfigfile ] [ -mmarkinterval ] [ -d ]

DESCRIPTION
Syslogd reads and logs messages into a set of files described by
the configuration file /etc/syslog.conf. Each message is one line.
A message can contain a priority code, marked by a number in angle
braces at the beginning of the line. Priorities are defined in
<sys/syslog.h>. Syslogd reads from the UNIX domain socket
/dev/log, from an Internet domain socket specified in
/etc/services, and from the special device /dev/klog (to read
kernel messages).

Syslogd configures when it starts up and whenever it receives a
hangup signal. Lines in the configuration file have a selector to
determine the message priorities to which the line applies and an
action. The action fields are separated from the selector by one
or more tabs.

Selectors are semicolon separated lists of priority specifiers.
Each priority has a facility describing the part of the system that
generated the message, a dot, and a level indicating the severity
of the message. Symbolic names may be used. An asterisk selects
all facilities. All messages of the specified level or higher
(greater severity) are selected. More than one facility may be
selected using commas to separate them. For example:

*.emerg;mail,daemon.crit

Selects all facilities at the emerg level and the mail and daemon
facilities at the crit level.

Known facilities and levels recognized by syslogd are those listed
in syslog(3) without the leading "LOG_". The additional facility
"mark" has a message at priority LOG_INFO sent to it every 20
minutes (this may be changed with the -m flag). The "mark"
facility is not enabled by a facility field containing an asterisk.
The level "none" may be used to disable a particular facility.
For example,

*.debug;mail.none

Sends all messages except mail messages to the selected file.

The second part of each line describes where the message is to be
logged if this line is selected. There are four forms:

A filename (beginning with a leading slash). The file will be
opened in append mode.

A hostname preceeded by an at sign ("@"). Selected messages
are forwarded to the syslogd on the named host.

A comma separated list of users. Selected messages are written
to those users if they are logged in.

An asterisk. Selected messages are written to all logged-in
users.

Blank lines and lines beginning with ‘#’ are ignored.

For example, the configuration file:

kern,mark.debug /dev/console
*.notice;mail.info /usr/spool/adm/syslog
*.crit /usr/adm/critical
kern.err @ucbarpa
*.emerg *
*.alert eric,kridle
*.alert;auth.warning ralph

logs all kernel messages and 20 minute marks onto the system
console, all notice (or higher) level messages and all mail system
messages except debug messages into the file /usr/spool/adm/syslog,
and all critical messages into /usr/adm/critical; kernel messages
of error severity or higher are forwarded to ucbarpa. All users
will be informed of any emergency messages, the users "eric" and
"kridle" will be informed of any alert messages, and the user
"ralph" will be informed of any alert message, or any warning
message (or higher) from the authorization system.

The flags are:

-f Specify an alternate configuration file.

-m Select the number of minutes between mark messages.

-d Turn on debugging.

Syslogd creates the file /etc/syslog.pid, if possible, containing a
single line with its process id. This can be used to kill or
reconfigure syslogd.

To bring syslogd down, it should be sent a terminate signal (e.g.
kill ‘cat /etc/syslog.pid‘).

FILES
/etc/syslog.conf the configuration file
/etc/syslog.pid the process id
/dev/log name of the UNIX domain datagram log socket
/dev/klog the kernel log device